JJPrise Enterprise Lighting Kit
Product Code: ST-01
0
£75.00 inc. tax
Description
Lighting kit for the Revell 1:500 Into Darkness Enterprise model kit.
Our fully wired kit is easy to install and runs off a 9V Li-Ion battery (not supplied).
The kit consists of:
Control Board with 2 ATtiny85 microprocessors, switch, 9V battery Clip, single flash beacons, dish light and sockets for looms
2 x Bussard looms
2 x Propulsion looms
1 x Twin Flash Beacon loom
2 x Interior Light looms
1 x Impulse loom
The following lights are reproduced with the kit:
12 x Twin Flash Beacons (via 1mm fibre guides)
3 x Single Flash Beacons
Interior Lights to Saucer, Hull and Propulsion Units
Impulse Drive
Warp Drives
Bussard Lights
The Bussard lights are wired to spin in opposite directions.
On power up all light come on and there is some sequencing for the Impulse and Warp Drives, first the Impulse Drives only light, then Impulse and half intensity Warp then Full Warp only. The processors also produce the Twin and Single flash beacons.
A full set of instructions and photos showing the installation of the kit and minor modifications to the base kit are provided on CD.
No soldering is required as the kit plugs together using header pins and sockets.
A video of the completed kit can be seen HERE
**** Postage cost only applies to UK sales for all other countries please contact before buying as postage may be more ****
For customers outside of the UK please contact for shipping cost before buying.
Not suitable for children due to small parts
Our fully wired kit is easy to install and runs off a 9V Li-Ion battery (not supplied).
The kit consists of:
Control Board with 2 ATtiny85 microprocessors, switch, 9V battery Clip, single flash beacons, dish light and sockets for looms
2 x Bussard looms
2 x Propulsion looms
1 x Twin Flash Beacon loom
2 x Interior Light looms
1 x Impulse loom
The following lights are reproduced with the kit:
12 x Twin Flash Beacons (via 1mm fibre guides)
3 x Single Flash Beacons
Interior Lights to Saucer, Hull and Propulsion Units
Impulse Drive
Warp Drives
Bussard Lights
The Bussard lights are wired to spin in opposite directions.
On power up all light come on and there is some sequencing for the Impulse and Warp Drives, first the Impulse Drives only light, then Impulse and half intensity Warp then Full Warp only. The processors also produce the Twin and Single flash beacons.
A full set of instructions and photos showing the installation of the kit and minor modifications to the base kit are provided on CD.
No soldering is required as the kit plugs together using header pins and sockets.
A video of the completed kit can be seen HERE
**** Postage cost only applies to UK sales for all other countries please contact before buying as postage may be more ****
For customers outside of the UK please contact for shipping cost before buying.
Not suitable for children due to small parts
